Specification for the use of Press Brake Tools

1. Connect the power supply of the bending machine, turn the key switch, press the oil pump to start, and the bending machine oil pump starts to rotate. At this time, the machine has not yet started working.

2. Travel adjustment requires a trial run before officially starting the bending work using the Press Brake Tools. When the upper mold of the bending machine descends to the bottom, there must be a gap of plate thickness. Otherwise, it will cause damage to the mold and machine. The adjustment of the itinerary also includes electric quick adjustment and manual fine adjustment.

3. The selection of the slot for the Press Brake Tools generally requires selecting a slot with a width 8 times the thickness of the plate. If bending a 4mm sheet metal, a slot of about 32 should be selected.

4. Check the overlap and firmness of the upper and lower molds of the bending machine; Check whether each positioning device meets the requirements for processing. Regularly check the overlap of the upper and lower molds; Whether the indication of the pressure gauge complies with the regulations.

5. When bending the sheet metal, it must be compacted to prevent the sheet metal from lifting and injuring the operator during bending.

6. When adjusting the sheet metal pressing mold, the power must be cut off and the operation must be stopped before proceeding.

7. When changing the opening of the lower die of the variable bending machine, no material is allowed to come into contact with the lower die.

8. It is prohibited to use bending machine molds to bend excessively thick iron plates or quenched steel plates, high-grade alloy steel, square steel, and plates that exceed the performance of the plate bending machine, in order to avoid damaging the machine tool.

9. Turn off the bending machine and place wooden blocks on the lower mold below the oil cylinders on both sides to lower the upper sliding plate onto the wooden blocks. Exit the control system program first, and then cut off the power.